CCS2-compatible electric cars, buses and trucks within the charger’s operating limits
F-273, Solaris 1, Saki Vihar Road, Powai, Mumbai, MH - 400072
Plan charging capacity for busy highway locations, charging hubs and commercial fleets. The ZeroFootprint 240 kW CCS2 DC Charger supports compatible electric cars, buses and trucks. This dual-gun configuration provides up to 120 kW per gun and 240 kW total station output, allowing two compatible vehicles to charge at once. Wi-Fi, GSM and LAN connectivity support OCPP-based charging management. Actual charging power depends on the vehicle’s DC charging capability, battery condition, state of charge and available site power.
₹15,000.00
CCS2-compatible electric cars, buses and trucks within the charger’s operating limits
Installation requires a site assessment and a dedicated 415 V three-phase supply with neutral and protective earth. The installer must confirm sanctioned load, upstream protection, cable sizing and earthing for the selected configuration. Provide a suitable foundation and access on all four sides for operation and servicing. Provide a canopy for outdoor installation. For installation assistance or product support, email support@zerofootprint.in
Includes a 2-year warranty. Contact ZeroFootprint for the applicable coverage, exclusions and service terms for your charger configuration. For installation assistance or product support, email support@zerofootprint.in
Plan charging capacity for busy highway locations, charging hubs and commercial fleets. The ZeroFootprint 240 kW CCS2 DC Charger supports compatible electric cars, buses and trucks. This dual-gun configuration provides up to 120 kW per gun and 240 kW total station output, allowing two compatible vehicles to charge at once. Wi-Fi, GSM and LAN connectivity support OCPP-based charging management. Actual charging power depends on the vehicle’s DC charging capability, battery condition, state of charge and available site power.
| Variant | 120 + 120 kW dual gun |
|---|
Cash on Delivery (COD)
GST Invoice
| Specification | Value |
|---|---|
| Input voltage | 415 V AC, three phase; L1, L2, L3, N, PE |
| Maximum station output | 240 kW |
| Connector | CCS2 |
| Power per gun | Up to 120 kW per gun on the 120 + 120 kW configuration |
| Output current | Up to 250 A per gun |
| Cable length | 5 m |
| Connectivity & protocol | Wi-Fi/GSM/LAN; OCPP 1.6J |
| User access | RFID, QR code, mobile app and Plug & Play |
| Energy metering | In-built Class 1 meter |
| Protection | Voltage, current, ground fault, short circuit, surge, residual current and temperature protection; emergency stop |
| Ingress protection | IP54 |
| Mounting | Floor mount; access required on all four sides |
Plug into any standard 16A rated 3-pin socket, at home, at the office, or while travelling. Adjustable current from 8A to 16A to match whatever power is available.
More station capacity for demanding charging sites.
Plan charging capacity for busy highway locations, charging hubs and commercial fleets. The ZeroFootprint 240 kW CCS2 DC Charger supports compatible electric cars, buses and trucks. This dual-gun configuration provides up to 120 kW per gun and 240 kW total station output, allowing two compatible vehicles to charge at once. Wi-Fi, GSM and LAN connectivity support OCPP-based charging management. Actual charging power depends on the vehicle’s DC charging capability, battery condition, state of charge and available site power.
| Specification | Value |
|---|---|
| Input voltage | 415 V AC, three phase; L1, L2, L3, N, PE |
| Maximum station output | 240 kW |
| Connector | CCS2 |
| Power per gun | Up to 120 kW per gun on the 120 + 120 kW configuration |
| Output current | Up to 250 A per gun |
| Cable length | 5 m |
| Connectivity & protocol | Wi-Fi/GSM/LAN; OCPP 1.6J |
| User access | RFID, QR code, mobile app and Plug & Play |
| Energy metering | In-built Class 1 meter |
| Protection | Voltage, current, ground fault, short circuit, surge, residual current and temperature protection; emergency stop |
| Ingress protection | IP54 |
| Mounting | Floor mount; access required on all four sides |
CCS2-compatible electric cars, buses and trucks within the charger’s operating limits
Installation requires a site assessment and a dedicated 415 V three-phase supply with neutral and protective earth. The installer must confirm sanctioned load, upstream protection, cable sizing and earthing for the selected configuration. Provide a suitable foundation and access on all four sides for operation and servicing. Provide a canopy for outdoor installation. For installation assistance or product support, email support@zerofootprint.in
Includes a 2-year warranty. Contact ZeroFootprint for the applicable coverage, exclusions and service terms for your charger configuration. For installation assistance or product support, email support@zerofootprint.in
₹15,000.00
Subscribe to get the latest news on new EV charger launches, offers and industry updates from ZeroFootprint.
|
|
|

Reviews
There are no reviews yet.