F-273, Solaris 1, Saki Vihar Road, Powai, Mumbai, MH - 400072
Get more from your portable EV charger with accessories built for everyday charging. Set up a safe 32A connection with our pre-wired MCB Distribution Box, charge your 7.4 kW charger from any 16A home socket with our Adapter Cable, and keep all your gear protected on the road with our waterproof Storage Bag.
From long drives to home garages, ZeroFootprint accessories make it easier to store, connect and power your portable EV charger wherever you park.
Keep your portable charger, cables and adapters packed and protected in the boot with the waterproof storage bag, ready whenever you need a top-up.
Use the 32A to 16A adapter cable to run a 7.4 kW portable charger from a regular 16A home socket for easy, everyday overnight charging.
Carry the adapter cable to charge from any standard 16A socket at a friend's place, a family home or workplace parking when you're away from home.
Set up a dedicated charging point with the pre-wired 32A MCB socket box, built for safe, faster 7.4 kW charging in garages and private parking.
Store, connect and power your portable EV charger with accessories designed and made in India by ZeroFootprint.
EV Insights
Most likely, yes. The 13 x 13 x 4 inch bag is measured to fit most portable EV chargers sold in India, including those from Ather, OLA, Hero, TVS, Bajaj, Tata, MG, BYD, Hyundai, Kia, BMW, Mercedes and Audi, along with the charging cable, connectors and small accessories.
Yes, with the 32A to 16A Adapter Cable. It connects your charger's 32A plug to a standard 16A 3-pin socket. Simply set the current on your charger to 8A, 10A, 12A or 16A to match the available power. Charging will be slower than at full 32A, and the socket should be in good condition and properly earthed.
The Adapter Cable is ideal for flexible charging wherever a 16A socket is available, such as at the office or while travelling. The MCB Socket Box is a permanent 32A point for your home or parking spot, letting your 7.4 kW portable charger run at its full rated power with built-in overload and short-circuit protection.
Yes. The socket and MCB come factory pre-wired inside the enclosure, so there is no internal wiring to do, but the box should be wall-mounted and connected to your mains supply and earth by a qualified electrician for safe operation.
Yes. It works with any single-phase 220 to 250V load drawing up to 32A, including split ACs up to 3 ton, heat pumps, water pumps, motors, compressors, workshop machinery and welding equipment.
They are built for everyday conditions. The storage bag uses waterproof 600D polyester, the Adapter Cable has an IP67-rated connector that is protected from rain and dust, and the MCB Socket Box has an IP44-rated socket with a flip cover that resists dust and water splashes, making it suitable for garages, parking areas and outdoor sheds.
Fill up the details for quick pricing estimates